Deutsch Englisch


Professional Pneumatic Tools


Ball
5003, 5004
Pneumatic Impact Wrench Mini, 450 Nm
  • extremely handy impact wrench with only 160 mm length
  • for work at difficult accessible areas
  • maximum performance at minimum weight
  • with vibration-damped composite housing
  • non-slip cold insulated handle
  • exhaust air guided through handle
  • always full capacity when loosening
  • clockwise 3-step torque regulation when tightening
  • clockwise/counter clockwise performance regulation protected in rear motor plate
  • with high-performance twin-hammer mechanism
  • air inlet thread 1/4‘‘
  • Operating pressure 6,3 bar Tightening torque max. 450 Nm
  • max. sound level 95 dB (A) Lp A
  • average air consumption 100 l/min
  • recommended hose inner-Ø 8 mm
  • vibration acceleration 5,9 m/s²
  • including brass nipple

 

 
Ball
5000
Pneumatic Impact Wrench 1/2", 1350 Nm
  • extremely powerful and ultra light
  • max. torque 1350 Nm at just 2 kg weight
  • with vibration-damped composite housing
  • non-slip cold insulated handle
  • exhaust air guided through handle
  • always full capacity when loosening
  • clockwise- 3-step torque regulation when tightening
  • clockwise/counter clockwise performance regulation protected in rear motor plate
  • with high-performance twin-hammer mechanism
  • air inlet thread 1/4‘‘
  • operating pressure 6,3 bar
  • Tightening torque max. 1350 Nm
  • Maximum loosening 1850 Nm
  • max. sound level 95 dB (A) Lp A
  • average air consumption 170 l/min
  • recommended hose inner-Ø 8 mm
  • vibration acceleration 7,9 m/s²
  • including brass nipple

 

 
Ball
5001
Pneumatic Impact Wrench 3/4", 1900 Nm
  • extremely powerful and ultra light
  • max. torque 1900 Nm at just 3,4 kg weight
  • with vibration-damped composite housing
  • non-slip cold insulated handle
  • exhaust air guided through handle
  • always full capacity when loosening
  • clockwise- 3-step torque regulation when tightening
  • clockwise/counter clockwise performance regulation protected in rear motor plate
  • with high-performance twin-hammer mechanism
  • air inlet thread 3/8‘‘
  • operating pressure 6,3 bar
  • Tightening torque max. 1900 Nm
  • Maximum loosening 2730 Nm
  • max. sound level 95 dB (A) Lp A
  • average air consumption 280 l/min
  • recommended hose inner-Ø 13 mm
  • vibration acceleration 12,3 m/s²
  • including brass nipple

 

 
Ball
5002
Pneumatic Impact Wrench 1
  • extremely powerful with optimal working weight
  • max. torque 2450 Nm at just 7,2 kg weight
  • with vibration-damped composite housing
  • non-slip cold insulated handle
  • swivel air inlet thread and exhaust air guided through handle
  • always full capacity when loosening
  • clockwise- 3-step torque regulation when tightening
  • clockwise/counter clockwise performance regulation protected in rear motor plate
  • with super high-performance twin-hammer mechanism
  • air inlet thread 1/2‘‘
  • operating pressure 6,3 bar
  • Tightening torque max. 2450 Nm
  • Maximum loosening 3500 Nm
  • max. sound level 95 dB (A) Lp A
  • average air consumption 370 l/min
  • recommended hose inner-Ø 13 mm
  • vibration acceleration 52,2 m/s²
  • including brass nipple

 

 
Ball
5011
Pneumatic Ratchet Wrench 1/4
  • for effortless working at difficult accesible areas
  • very light composite housing
  • handy design
  • clockwise/counter-clockwise convertible at ratchet head
  • non-slip cold insulated handle
  • exhaust air guided through handle
  • little vibration only
  • air inlet thread 1/4‘‘
  • operating pressure 6,3 bar
  • Tightening torque max. 35 Nm
  • free-running speed 220 rpm
  • max. sound level 72 dB (A) Lp A
  • average air consumption 100 l/min
  • recommended hose inner-Ø 8 mm
  • including brass nipple

 

 
Ball
5010, 5012
Pneumatic Ratchet Wrench 90 Nm
  • extremely handy ratchet wrench with only 160 mm length
  • for effortless working at difficult accessible areas
  • maximum performance at minimum weight
  • very light composite housing
  • handy design
  • clockwise/counter-clockwise convertible at ratchet head
  • exhaust air guided through handle
  • non-slip cold insulated handle
  • little vibration only
  • air inlet thread 1/4‘‘
  • operating pressure 6,3 bar
  • Tightening torque max. 90 Nm
  • free-running speed 170 rpm
  • average air consumption 170 l/min
  • max. sound level 93 dB (A) Lp A
  • recommended hose inner-Ø 8 mm
  • including brass nipple

 

 
Ball
5005, 5006
Pneumatic Drill, reversible
  • robust housing
  • handy design
  • direction of rotation reversible
  • ELORA-No. 5005: drill chuck, clamping capacity up to Ø 13 mm
  • ELORA-No. 5006: keyless drill-chuck, clamping capacity up to Ø 10 mm
  • Non-slip cold insulated handle
  • exhaust air guided through handle
  • little vibration
  • air inlet thread 1/4''
  • operating pressure 6,3 bar
  • ELORA-No. 5005: max. free-running speed 750 rpm
  • ELORA-No. 5006: max. free running speed 1800 rpm
  • max. sound level 87 dB (A) Lp A
  • average air consumption 240 l/min
  • recommended hose inner- Ø 8 mm
  • including brass nipple

 

 
Ball
5014
Grinder straight Ø 6 mm
  • for grinding, polishing and deburring
  • robust and light housing
  • ergonomical designed for easy one-handed operation
  • low vibration
  • Speed infinitely adjustable with safety trigger
  • non-slip, cold- insulated handle
  • Collet Ø 6 mm
  • Air-inlet thread 1/4''
  • Operating pressure 6,3 bar
  • Max. free-running speed 25000 rpm.
  • Max. sound level 86 dB(A)Lp A
  • Average air consumption 270 l/min.
  • recommended hose inner- Ø 8 mm
  • including brass nipple

 

 
Ball
5015
Angle Grinder Ø 6 mm
  • for grinding, polishing and deburring
  • robust and light housing
  • ergonomically designed for easy one-handed operation
  • low vibration
  • Speed infinitely adjustable with safety trigger
  • Non-slip cold- insulated handle
  • Collet Ø 6 mm
  • Air-inlet thread 1/4''
  • Operating pressure 6,3 bar
  • Max. free-running speed 22000 rpm.
  • Max. sound level 72 dB(A)Lp A
  • Average air consumption 270 l/min.
  • recommended hose inner- Ø 8 mm
  • including brass nipple

 

 
Ball
5016
Angle Grinder Ø 125 mm
  • robust housing
  • lateral grip for left and right use
  • release with safety trigger
  • with spindle lock for disc change
  • for grinding discs with Ø 125 mm and 6 mm thickness (M14 x 1,5)
  • Air-inlet thread 1/4''
  • Operating pressure 6,3 bar
  • Max. free-running speed 11000 rpm.
  • Max. sound level 86 dB(A)Lp A
  • Average air consumption 490 l/min.
  • recommended hose inner- Ø 8 mm
  • including brass nipple

 

 
Ball
5017
Angle Grinder Ø 180 mm
  • robust housing
  • lateral grip for left and right use
  • release with safety trigger
  • with spindle lock for disc change
  • for grinding discs with Ø 180 mm and 6 mm thickness (M14 x 2)
  • Air-inlet thread 3/8''
  • Operating pressure 6,3 bar
  • Max. free-running speed 7000 rpm
  • Max. sound level 86 dB(A)Lp A
  • Average air consumption 500 l/min.
  • recommended hose inner- Ø 13 mm
  • including brass nipple

 

 
Ball
5019
Needle Scaler
  • for efficient removal of rust or many other coatings
  • only suitable for solid metal parts, no steel sheets
  • 2-piece housing for easy maintenance
  • non-slip cold insulated handle
  • 19 (3 mm) needles
  • Air-inlet thread 1/4''
  • Operating pressure 6,3 bar
  • Number of strokes 3700/min.
  • Max. sound level 108 dB(A)Lp A
  • Average air consumption 120 l/min.
  • recommended hose inner- Ø 8 mm
  • including brass nipple

 

 
Ball
5018
Sabre Saw Set
  • for metal and body work
  • Suitable for small radii
  • robust housing and safety lever
  • with non-slip cold-insulated handle
  • exhaust air guided through handle
  • adjustable bow-wing skid
  • with 5 sawblades, mini-oiler and swivel connection to prevent kinking of the hose
  • Air-inlet thread 1/4''
  • Operating pressure 6,3 bar
  • Stroke length 10 mm
  • Cutting capacity 1,5 mm
  • Number of strokes 9500/min.
  • Max. sound level 83 dB(A)Lp A
  • Average air consumption 170 l/min.
  • recommended hose inner- Ø 8 mm
  • including brass nipple