ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png Tool solutions in excellent quality Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719
  • in plastic case with hard foam insert
  • for repairing threads from M5x0,8, M6x1, M8x1,25, M10x1,5, M12x1,75
  • for cross slotted screws
  • matt chrome-plated
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 6,3, ISO 1174, with ball retaining groove
  • with manganese-phosphated blade
  • tips according to DIN ISO 8764-1 PH
  • for cross slotted screws
  • matt chrome-plated
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 6,3, ISO 1174, with ball retaining groove
  • with manganese-phosphated blade
  • tips according to DIN ISO 8764-1 PZ
  • small version
  • thin, ground heads
  • chrome plated, polished
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • for inside hexagon screws
  • sorted on metal ring
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • nickel plated
  • ELORA-Chrome-Vanadium 59 CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • for use in awkward areas
  • swivel angel up to 30°
  • ball profile on the long side
  • nickel plated
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • extra long
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • in black plastic wallet
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • in plastic holder
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2243
  • DIN ISO 2936
  • especially appropriate for difficult to reach areas
  • forged pattern
  • throughout hardened and tempered to 42-46 HRC
  • chrome-plated
  • ELORA-Chrome Vanadium 31CrV3 / 1.2208
  • for file blades ELORA-No. 1641 (delivery without file blade)
  • adjustable pattern with clamping screw
  • Aluminium
  • for file blades ELORA-No. 1641 (delivery without file blade)
  • wood
for file holder ELORA-No. 1640 and 1640H
  • for seaming of metal sheets
  • forged, black coated
  • red dip insulated handles
  • high grade tool steel
  • for punching of body panels for MIG / MAG welding and flanging metal edges on overlap of seams
  • flanging capacity: 11 mm, jaw width: 23 mm, stamp
  • diameter: 5 mm
  • for metal sheet up to 1 mm
  • with swivel head and replaceable stamp
  • lacquered, handles with PVC grips
  • high grade tool steel
  • forged
  • blue lacquered, faces ground
  • high grade tool steel C45 / 1.0503
  • forged
  • blue lacquered, faces ground
  • high grade tool steel C45 / 1.0503
  • drop forged hammer head with safety collar
  • inductive hardened and coated
  • faces polished
  • ash handle with shaft protection bush made of nylon
  • mechanically fixed with a steel ring wedge and epoxide resin
  • ELORA-high grade tool steel C45 / 1.0503
  • hammer head according to DIN 6475, handle according to DIN 5135
  • vibration-free
  • drop forged hammer head with safety collar
  • inductive hardened and coated
  • faces polished
  • 3 component high safety handle with nonslip rubber grip and a core made of aluminium alloy
  • shaft protection bush made of nylon
show more show less
  • heavy forged pattern
  • 2 arms
  • by turning the puller hooks usable as external and internal puller
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • adjustable, for hacksaw blades with 250 mm (10'') or 300 mm (12'') length
  • including metal saw blade 300 mm (12'')
  • similar to DIN 6473, shape B
  • 24 t.p.i.
  • high-speed steel resp. carbon steel with 0.95% C
  • DIN 6494, form B
  • 24 t.p.i.
  • high-speed steel resp. carbon steel with 0.95% C
  • DIN 6494, form A
  • for metal work
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • according to DIN 6453
  • 5 pcs.
  • in black plastic rolling pouch
  • completely hardened and tempered
  • striking heads inductive tempered
  • working edges ground and oiled
  • shafts black lacquered
show more show less
  • for metal work
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • according to DIN 6453
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
  • according to DIN 6458
  • 6 pcs.
  • in metal box
  • completely hardened and tempered
  • striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
show more show less
  • 6 pcs.
  • in metal box
  • completely hardened and striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • according to DIN 6450
  • 6 pcs.
  • in metal box
  • completely inductive hardened and tempered
  • striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
show more show less
  • for punching of carton, leather, rubber, sealing material and other soft material
  • forged, cutting edge hardened and ground
  • shaft red coated
  • lightly conical inside for easy removal of the cuttings
  • high grade steel
  • according to DIN 7200, Form A
  • for cross slotted screws PH
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 C 6,3, DIN ISO 1173
  • according to ISO 2351-2, tip according to DIN ISO 8764-1 PH
  • for cross slotted screws PZ
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, ISO 1173
  • according to ISO 2351-2, tip according to DIN ISO 8764-1 PZ
  • for cross slotted screws PH
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
  • for cross slotted screws PZ
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 C 8, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
  • for cross slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 8764-1 PH
  • for cross slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 8764-1 PZ
  • rubberized head-lamp with reduced glare
  • rubberized-pressure switch for continuous and instantaneous light
  • electrically non-conductive housing made of ABS and polycarbonate
  • built-in clip holder on the lamp head
  • lamp type eLED, light output 35 lumens
  • illumination range 64 meter, burning time approx 3 hrs.
show more show less
  • for cross slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 8764-1 PH
  • for stone work
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • according to DIN 7256
  • strong edition for tough conditions
  • maximum stability under load of the blades by inductive hardening
  • cutting edge hardness: 63-64 HRC
  • for medium hard wire, steel wire (tensile strength 1600N/mm²)
  • serrated gripping surface and burner hole
  • ground, with red dip insulated handles
show more show less
  • with continuous hexagon blade
  • Material: S2
  • DIN 5264
  • with continuous hexagon blade
  • Material: S2
  • DIN 5264
  • with continuous hexagon blade
  • Material: S2
  • DIN 5264
  • for cross slotted screws PH
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
  • for cross slotted screws PZ
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
  • with continuous hexagon blade< br/> Material: S2
  • DIN 5264
  • Tip/edge with gun metal finish to avoid a damage of the Chrome-Nickel surface during the use
  • Blade ductile and form stable for high torques acc. to DIN and ISO standards
  • High product security
  • Ergonomical 2 component handle for a fatigue-proof working
  • Perforated handle which is in combination with another screwdriver blade a T-handle for additional maximal torque power
  • Material: S2
  • DIN 5264/ DIN 5265
  • hooked jaws
  • for difficult to pull down spark plug sockets
  • matt chrome plated
  • nonslip QUATROLIT®-2C-handles
  • ELORA-high grade tool steel C45 / 1.0503
  • for frontal virtually flush cutting of very hard wires, can be used horizontally and vertically for work with electrostatic endangered components
  • straight, compact, solid head, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 84-86 HRA
  • ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • strong edition for tough conditions
  • lay on cutter box for better cutting
  • maximum stability under load by inductive hardening of the blades
  • cutting edge hardness: 63-64 HRC
  • for medium hard wire, steel wire (tensile strength 1600N/mm²)
  • serrated gripping surface and burner hole
show more show less
  • for cross slotted screws
  • matt chrome plated forged blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • forged blade
  • through hardened
  • no galvanic surface treatment
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for plain and cross slotted screws
  • suitable for ELORA-No. 520
  • hexagon blade matt chrome-plated
  • through hardened
  • ELORA-special steel 73MoV5 / 1.2381
  • blade edge according to DIN ISO 2380-1
  • tip according to DIN ISO 8764-1 PH
  • for plain and cross slotted screws
  • suitable for ELORA-No. 520
  • hexagon blade matt chrome-plated
  • through hardened
  • ELORA-special steel 73MoV5 / 1.2381
  • blade edge according to DIN ISO 2380-1
  • tip according to DIN ISO 8764-1 PZ
  • for cross slotted screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • plastic handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • plastic handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated forged blade with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated hexagon blade with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • to detect AC voltage between 6V-1000V and DC voltage between 6V-1400V
  • optical, audible and vibration alert if life-threatening voltage occurs starting from 35V
  • polarity phase indication at DC
  • automatic selection of measurement range, 1 pole single phase detection, two-pole 3 phase control
  • continuity test 0-200 kOhm (optical and audible)
  • Diode test
show more show less
  • for cross slotted screws
  • matt chrome plated forged blade with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
for inner and outer deburring of copper-, brass-, aluminium- or plastic tubes
  • for plain slotted screws
  • matt chrome plated forged blade
  • through hardened
  • blade edge gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • blade through handle, dull chrome plated with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • wooden handle, clear lacquered with leather cap
  • blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • similar DIN ISO 8764-2, tip according to DIN ISO 8764-1 PH
  • for cross slotted screws
  • blade through handle, dull chrome plated with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • wooden handle, clear lacquered with leather cap
  • blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • similar DIN ISO 8764-2, tip according to DIN ISO 8764-1 PZ
  • for cross slotted screws
  • matt chrome plated, tip gunmetal finished
  • Chrome-Vanadium 59CrV4 / 1.2242
  • according to DIN 5208, blade according to DIN ISO 8764-1 PH
  • for cross slotted screws
  • blade gunmetal-finish
  • impact resistant handle with suspension hole
  • up to ELORA-No. 910PH-0 ELORA-Chrome-Vanadium 73MoV52 / 1.2381, otherwise ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
  • tip according to DIN ISO 8764-1 PH
  • for cross slotted screws
  • blade gunmetal-finish
  • impact resistant handle with suspension hole
  • ELORA-Chrome-Vanadium 73MoV52 / 1.2381
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
  • tip according to DIN ISO 8764-1 PZ
  • 6 pcs.
  • in plastic holder
  • completely inductive hardened and tempered
  • striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
show more show less
  • German pattern
  • strong edition for tough conditions
  • lay on cutter box for better cutting
  • maximum stability of the blades under load by inductive hardening
  • cutting edge hardness: 63-64 HRC
  • for medium hard wire, steel wire (tensile strength 1600 N/mm²)
show more show less
  • 6 pcs.
  • in plastic holder
  • completely hardened and striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • 6 pcs.
  • in wooden holder
  • completely hardened and striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • 6 pcs.
  • in wooden holder
  • completely inductive hardened and tempered
  • striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
show more show less
  • 6 pcs.
  • in plastic holder
  • completely hardened and tempered
  • striking heads inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
show more show less
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • suitable for Tool Cabinet ELORA-No. 1100L
  • suitable for Roller Tool Cabinet Buddy ELORA-No. 1210-L7, Super Caddy ELORA-No. 1220-L7 and L8, ToolJET ELORA-No. 1225-L7
  • suitable for Tool Cabinet ELORA-No. 1100L
  • suitable for Roller Tool Cabinet Buddy ELORA-No. 1210-L7, Super Caddy ELORA-No. 1220-L7 and L8, ToolJET ELORA-No. 1225-L7